Features

  •  

    The highest resolution is 1920 x1080, output Full HD 1080 p real-time image.

  •  

    Using advanced coding technology, time delay to within 200 ms

  •  

    Support CVBS output

  •  

    High SNR sensor, with high sensitivity, and good low illumination

  •  

    Support 2D & 3D noise reduction

  •  

    Support stream

  •  

    Support automatic aperture, automatic electronic shutter, adapting different monitoring environment

Specifications

Video System 1080i/59.94, 1080i/50,
1080p/29.97, 1080p/25,
720p/59.94, 720p50,
NTSC, PAL
Sensor 1/3", CMOS, Total pixel:
2.2M, Effective pixel:
2.07M
scanning mode Progressive
Lens F2.8mm ~ 12mm, F1.4; 4x optical zoom/digital zoom, DC drive, C/CS lens
Aperture DC drive
minimal illumination 0.05 Lux @ (F1.8, AGC ON)
shutter 1s ~ 1/10000s
white balance Auto, indoor and outdoor
Day And NightSystem ICR Infrared filter plate
Digital noise
reduction
2D&3D Digital noise
reduction
backlight compensation support
Video Compression H.264
Video Bit Rate 32 Kbps~16Mbps
Control mode Control port, Internet
Auto/Manual Support auto/manual white balance adjustment, auto/manual exposure adjustment (aperture, shutter, gain), fixed focus
Standard TCP/IP,HTTP,RTSP
General Function One push, Flashing, Signal stream, Mirror
Video output 1x,CVBS:75Ω/BNC
Network Interface 1xRJ45: 10M/100M Adaptive
Audio Input 1-ch 3.5mm audio interface, LINE IN
Audio Output 1-ch 3.5mm audio interface, LINE OUT
USB Interface 1xUSB2.0: A type jack
Communication Interface 1xRS-485: 2pin, Max Distance: 1500m, Protocol: Pelco-D/Pelco-P
Alarm Input 1
Alarm Output 1
Power Connector JEITA type (DC IN 12V)
Reset Button Support
Input Voltage 12V DC (10.8 ~ 13.0V DC)
Current Consumption 1A
Operating Temperature -15°C ~ 60°C
Storage Temperature -20°C ~ 80°C
Power Consumption 3.3W
Dimensions 127.5mm x 72.0mm x 60.0mm
Weight 0.5Kg

Rear Panel

No. Statement
1 power interface
External power adapter,must be 12 v.
2 Run light
3 USB interface(reserved)
4 TF Card(reserved)used to store image andVideo.
5 Audio output
Output LINE OUT audio, using to external
sounds playback devices, such as headphones, stereo(temporarily does not support)
6 Audio input
For linear audio input, such as pick-up signal. If linear audio input signal, need audio Settings, choose linear input (temporarily does not support)
7 RESET
Press the reset button (more than 5 seconds), restore factory default device, and restart.
8 Internet
10/100 m adaptive Ethernet interface, through the interface can be connected with network Settings, such as hubs, routers, switches and so on.
9 RS485ALARM INALARM OUT. (temporarily does not support)
10 CVBS interface
11 Power light

Dimension


Tel:(+86) 0755-86073683    Fax:(+86) 0755-86073689    Email:infoov@szreach.com
Technology support: In the network Copyright of SZ Reach TECH CO.,LTD.